Custom Ceramic Tubes & Pipes

Direct-factory precision machining of technical ceramic tubes and pipes in Alumina, Zirconia, Silicon Carbide, and Silicon Nitride. Available in straight, multi-hole, stepped, threaded, and custom-shaped configurations for semiconductor, industrial, and electrical applications.

Manufacturing Range

OD from 2 mm to 150 mm, wall thickness 0.5-20 mm, lengths up to 500 mm. OD tolerance to ±0.003 mm, concentricity ≤0.01 mm, and surface finish down to Ra 0.02 μm on OD. Actual capabilities depend on material, geometry, and drawing requirements.

Available Tube Materials

Select the ceramic material best suited to your operating environment

Ceramic Tube Materials

Alumina (Al₂O₃)

Grades: 95%, 99.5%, 99.8%

High hardness, excellent dielectric, good thermal shock resistance

Zirconia (ZrO₂)

Grades: Y-TZP, Mg-PSZ

Highest fracture toughness, transformation toughening, wear resistance

Silicon Nitride (Si₃N₄)

Grades: Sialon, SSN

High strength at temperature, thermal shock resistance, low density

Silicon Carbide (SiC)

Grades: Reaction-bonded, Sintered

Extreme hardness, high thermal conductivity, chemical inertness

Tube Configurations

Ceramic Tube Configurations

Straight Tubes

Standard round bore tubes in custom OD/ID/length combinations. OD range: 2-150 mm, wall thickness: 0.5-20 mm

Multi-Hole Tubes

Extruded or machined multi-channel tubes for heat exchangers, gas distribution, and fluid handling systems

Stepped & Tapered Tubes

Precision stepped bore and tapered OD profiles machined to drawing specification with tight concentricity

Shaped Tubes

Rectangular, hexagonal, and custom cross-section tubes produced via extrusion or CNC machining

Threaded Tubes

Internal and external thread profiles machined for assembly integration with metal or polymer fittings

Slotted & Perforated Tubes

Precision slots, holes, and perforation patterns for filtration, gas flow, and sensor protection

Precision Capabilities

Actual achievable tolerances depend on material, geometry, feature dimensions, and drawing requirements.

±0.003 mm
OD Tolerance
±0.005 mm
ID Tolerance
≤0.01 mm
Concentricity
Ra 0.4 μm
Surface Finish (ID)
Ra 0.02 μm
Surface Finish (OD)
500 mm
Max Length

Target Applications

Ceramic Tube Applications

Semiconductor Processing

  • -Gas showerhead tubes
  • -Chamber liner tubes
  • -Wafer boat components
  • -Thermocouple protection sheaths

Industrial & Mechanical

  • -Wear-resistant guide tubes
  • -Pump shaft sleeves
  • -Fiber optic alignment sleeves
  • -Laser cavity tubes

Electrical & Thermal

  • -High-voltage feedthrough insulators
  • -Heater element tubes
  • -Furnace muffle tubes
  • -Thermocouple protection

How Are Precision Ceramic Tubes Manufactured?

Precision ceramic tubes are manufactured through a combination of extrusion forming and CNC machining processes. Straight tubes, multi-hole configurations, stepped profiles, and custom geometries are produced in materials including alumina, zirconia, silicon nitride, and silicon carbide. OD and ID grinding achieve tight dimensional tolerances, while concentricity is maintained through precision cylindrical grinding. These tubes serve applications in semiconductor process equipment, industrial wear protection, high-temperature furnaces, and electrical insulation systems. Actual capabilities depend on material selection, geometry complexity, and specific drawing requirements.

Critical Features of Ceramic Tubes

Critical features and inspection methods for precision ceramic tubes
FeatureEngineering SignificanceInspection Method
Outer Diameter (OD)Housing fit, assembly clearanceCMM / OD gauge
Inner Diameter (ID)Flow passage, shaft clearanceCMM / bore gauge
Wall ThicknessPressure rating, structural rigidityCMM / micrometer
LengthAssembly stack-up, reachTrimos height gauge
ConcentricityUniform wall, balanced rotationRoundness tester / CMM
StraightnessAlignment, flow uniformitySurface plate / CMM
Surface Finish (ID/OD)Friction, particle generation, flowRoughness tester
Holes / SlotsGas flow, filtration, sensor accessVideo measuring system

Capability Context

The following capabilities represent demonstrated manufacturing results. Final achievable tolerances depend on material grade, tube dimensions, geometry, and inspection requirements.

Manufacturing capability context for ceramic tubes
FeatureRepresentative CapabilityApplicable ContextInspection
OD Tolerance±0.003 mmGround OD, standard tube sizesCMM
ID Tolerance±0.005 mmGround bores, size dependentCMM / bore gauge
Concentricity≤0.01 mmPrecision cylindrical grindingRoundness tester
Surface Finish (OD)Ra 0.02 μmMirror polished surfacesRoughness tester
Surface Finish (ID)Ra 0.4 μmStandard ground bore finishRoughness tester
Max Length500 mmStandard grinding capacityDimensional

Capabilities shown represent demonstrated or achievable manufacturing results. Final tolerances depend on ceramic material, part size, geometry, feature location, wall thickness, surface requirements and inspection method. Requirements are confirmed during drawing review.

Manufacturing Process for Ceramic Tubes

OD/ID Grinding

Precision cylindrical grinding for outer and inner diameters. Achieves dimensional tolerance and concentricity for all ceramic materials.

Deep Hole Processing

Deep bore grinding for high aspect ratio tubes. ±0.005 mm capability, aspect ratio dependent.

Slot & Hole Machining

Precision slots, holes, and perforation patterns via CNC diamond drilling. ±0.005 mm width tolerance.

Thread Cutting

Internal and external thread profiles for assembly integration. Confirmed for Si₃N₄ and BN materials.

Complex Profile Grinding

Stepped, tapered, and shaped tube profiles machined to drawing specification with tight concentricity.

Full Inspection

100% dimensional and visual inspection. CMM reports, surface finish measurements, and OQC documentation included.

What to Include in Your Tube Drawing or RFQ

Dimensions & Tolerances

OD, ID, length, wall thickness with geometric tolerances (concentricity, straightness). Include GD&T callouts for critical features.

Material Specification

Ceramic type and grade. Include application temperature and environment for material recommendation if needed.

Hole / Slot Requirements

Specify hole diameter, position, quantity, and slot dimensions. Include depth and aspect ratio for through-holes.

Surface Finish & Quantity

Ra values for ID and OD surfaces. Prototype or production quantity with target delivery date.

Submit Your Tube Drawing for Review

Upload your 2D blueprints or 3D CAD files (.STEP / .IGS). Our engineering team will perform a DFM review and provide a competitive quote within 24 hours. Prototype tubes available within 7-10 business days.

Submit Drawing for 24-Hour Review